Results 1 to 2 of 2

Thread: Cartridge Parts for Z8

  1. #1
    Sport Button On - DSC Off Robert Linton's Avatar
    Join Date
    Jan 2004
    Posts
    223

    Cartridge Parts for Z8

    As you might remember, approximately 12 years ago, Cartridge offered a small number of extremely high end components for the Z8. I thought that all were sold. However, yesterday, in cleaning out a store room, the following treasure trove of new parts was found:

    One Cartridge Drive Shaft Including:

    1. Carbon Fiber Shaft

    2. Bonded Aluminum Engine Side End

    3. Bonded Titanium Differential End

    4. Lightweight Constant Velocity Joint with Cartridge Ceramic Ball Bearings

    One Pair Cartridge Drive Axle Assemblies Including:

    1. Lightweight Constant Velocity Joints Including:

    a. Cartridge Ceramic Ball Bearings

    b. Inboard Constant Velocity Joints with Cooling Ribs and Removable Aluminum Covers

    c. Outboard Constant Velocity Joints with Removable Aluminum Covers

    2. AermetŪ Drilled Removable Axle Shafts Coated with Ti-Nitride and Titanium End Caps

    3. High Temperature Aerospace Boots

    4. 300M Fasteners Titanium Washers

    One Set Cartridge Suspension:

    1. Front Suspension Including:

    a. Aluminum Front Uniball Camber Adjustable Front Strut Mounts

    b. Billet Aluminum Front Struts with 2-Way Adjustable and Ride Height Adjustable Dampers

    c. Titanium Damper Nuts

    d. Titanium Beta C Springs with Enhanced Spring Rate

    2. Rear Suspension Including:

    a. Aluminum Uniball Rear Damper Mounts with Titanium Washers

    b. 2-Way Adjustable and Ride Height Adjustable Rear Dampers

    c. Titanium Damper Nuts

    d. Titanium Beta C Springs with Enhanced Spring Rate

    One Set Ti-nitrided Titanium/Anodized Aluminum Double Adjustable Front Drop Links with Titanium Locking Nuts

    One Set Ti-nitrided Titanium Adjustable Rear Drop Links with Titanium Locking Nuts\

    One Set Cartridge Brake System Including:

    1. Brembo Forged Aluminum Monobloc Front Calipers Including:

    a. 8 Cross and Gun Drilled Titanium Insert Aluminum Pistons Per Caliper

    b. Air Gaps

    c. Two Pads Per Side

    d. Billet Machined Anodized Aluminum Reduced Weight Caliper Mounting Brackets

    2. Brembo Forged Aluminum Monobloc Rear Calipers Including:

    a. 4 Cross and Gun Drilled Titanium Insert Aluminum Pistons Per Caliper

    b. Air Gaps

    c. Dual Pads

    d. Billet Machined Anodized Aluminum Reduced Weight Caliper Mounting Brackets

    3. 2618 Aluminum Floating Front and Rear Brake Disk Bells

    4. Slotted and Cross-Drilled Front and Rear Metal Disks (380 Millimeter x 32 Millimeter Front, 345 Millimeter x 28 Millimeter Rear)

    5. High Performance Brake Pads

    Two Sets Slotted and Cross-Drilled Front And Rear Metal Disks (380 Millimeter x 32 Millimeter Front, 345 Millimeter x 28 Millimeter Rear)

    If anyone is interested in any of the above, please either email me at [email protected] or call me at 212-628-6778.
                       

  2. #2
    Z8 Novice
    Join Date
    Oct 2015
    Posts
    11
    Hi Robert,

    Is any of this stuff still available? I am interested in the suspension and brakes.

    Thanks,
    Zach

Similar Threads

  1. New Cartridge Z8 Parts
    By Robert Linton in forum Suspension
    Replies: 2
    Last Post: February 13th 2017, 04:50
  2. Does Cartridge have a website?
    By 2112 in forum Engine & Drivetrain
    Replies: 1
    Last Post: December 10th 2008, 20:31
  3. Cartridge Front Suspension
    By Robert Linton in forum Suspension
    Replies: 1
    Last Post: August 16th 2007, 03:38
  4. Cartridge Axles
    By Robert Linton in forum Engine & Drivetrain
    Replies: 9
    Last Post: December 15th 2005, 02:58
  5. Cartridge - LeMans
    By Robert Linton in forum Z8 Chat Room
    Replies: 8
    Last Post: July 11th 2005, 03:41